Dye Rubber
 |
 Marvy Le Plume II Marker Set of 2 PRIMARY VICTORIAN  US $15.99
|
 ALCOHOL INK Tim Holtz MIXATIVES Metallic Snow Cap Ranger Adirondack opaque pearl US $4.69
|
 ALCOHOL INK Tim Holtz BRIGHTS Ranger Adirondack permanent acid free YOU PICK US $3.14
|
 SAKURA PIGMA MICRON BRUSH PEN BLACK NEW ART PENS TIP US $2.27
|
 ALCOHOL INK Tim Holtz EARTHTONES Ranger Adirondack permanent acid free YOU PICK US $3.14
|
 SAKURA PIGMA MICRON EARTH COLORS 6 PEN SET 05 HERITAGE US $13.98
|
 SAKURA PIGMA MICRON PEN BLACK 005 BLACK 12EA 20mm PENS US $22.97
|
 SAKURA PIGMA MICRON BRUSH TIP SET 8 COLOR NEW ART MARKER ARCHIVAL ACID FREE US $15.99
|
 LOT 12 Adirondack Color Wash Inks Complete Set by Ranger in New 2 oz Bottles US $59.99
|
 Dove Blender Pen 1 oz Refill for Watercolor Blending US $12.25
|
 Ranger Inkssentials MINI MISTERS 3 PACK US $4.83
|
 MARVY LE PLUME II DOUBLE ENDED MARKERS SET PRIMARY SET OF 12 NEW US $10.00
|
 Letraset Promarker Twin Tip Slate US $6.00
|
 Letraset Promarker Twin Tip Aubergine US $6.00
|
 Letraset Promarker Twin Tip Midnight Blue US $6.00
|
 Letraset Promarker Twin Tip Powder Blue US $6.00
|
 Letraset Promarker Twin Tip Tan US $6.00
|
 Letraset Promarker Twin Tip Pastel Pink US $6.00
|
 Letraset Promarker Twin Tip Bright Orange US $6.00
|
 Letraset Promarker Twin Tip Lavender US $6.00
|
 Letraset Promarker Twin Tip Apple US $6.00
|
 Letraset Promarker Twin Tip Aegean US $6.00
|
 09 10 In Colors 12x12 Cardstock 12 Stampin Up RET{ US $6.96
|
 LOT 41 Distress Stickles Glitter Glue Set by Tim Holtz US $95.99
|
 BRUSH MARKERS vivid dye based colors MARVY MATCHABLES US $22.00
|
 Ranger Ink Stampers Anonymous Tim Holtz Artist Trading Card Kit Creative US $53.00
|
 Handy Art Tye Dye Kit US $21.37
|
 Raw Bare Chipboard Die Cuts Lollipop Alphabet 57 pcs US $3.79
|
 Punch Stamping KiTTracerkinsPaperkinsStickers Lot 43 US $19.99
|
 Misc Lot of Scrapbook Supplies Stickers Embellishments letters Ribbon Velium US $36.00
|
 Punch Stampers KiTPaperkinStickersstencil New Lot 46 US $9.99
|
 Ranger Inkssentials Cut N Dry Stamp Pad Felt US $4.87
|
 Pioneer Gel Ink Pens Standard AFP1 US $5.50
|
 Martha Stewart Tinsel Glitter 1 oz Florentine Gold US $12.84
|
 Martha Stewart Tinsel Glitter 1 oz Fire Opal US $12.84
|
 Martha Stewart Tinsel Glitter 1 oz Feldspar US $12.84
|
 Martha Stewart Tinsel Glitter 1 oz Crystal US $12.84
|
 Raw Bare Chipboard Die Cuts Fun Serif Numbers 22 pcs US $1.89
|
 6 Raw Bare Chipboard Die Cuts Strawberry Raspberry US $1.10
|
 Ranger Ink Tim Holtz Distress Stickles Glitter Glue Tea Dye US $2.49
|
 Stickles Tim Holtz Designer Series Distress Stickles Collection Pack 2 US $42.33
|
 Tulip One Step Tie Dye Kit Super Big 12 Colors US $32.66
|
 Letraset Promarker Twin Tip Tulip Yellow US $6.18
|
 Letraset Promarker Twin Tip Warm Grey 5 US $6.18
|
 Letraset Promarker Twin Tip Lime Zest US $6.18
|
 Letraset Promarker Twin Tip Magenta US $6.18
|
 Letraset Promarker Twin Tip Moss US $6.18
|
 Letraset Promarker Twin Tip Pastel Yellow US $6.18
|
 Letraset Promarker Twin Tip Sandstone US $6.18
|
 Letraset Promarker Twin Tip Arctic Blue US $6.18
|
 Letraset Promarker Twin Tip Leaf Green US $6.18
|
 Letraset Promarker Twin Tip Marsh Green US $6.18
|
 Marvy CLEAR STAMP Brush Markers Set 6 pc NEW US $6.50
|
 NEW RANGER DISTRESS TIM HOLTZ TEA DYE STICKLES US $2.50
|
 Marvy Le Plume II Double Ended Marker 12 pcs PRIMARY COLORS US $7.99
|
 6 Raw Bare Unfinished Chipboard Die Cuts Snowflakes US $1.10
|
 Tulip One Step Large Tie Dye Kit Rainbow US $20.27
|
 Tulip One Step Large Tie Dye Kit Ultimate US $20.27
|
 Fishing Pole US $2.69
|
 Watercolor Backgrounds 12x12 Papers Scrapbook US $12.55
|
 STAMPIN UP ORCHID OPULENCE DYE INK REFILL BOTTLE RETIRED US $4.51
|
 STAMPIN UP PINK PASSION DYE INK REFILL BOTTLE RETIRED US $6.41
|
 STAMPIN UP GLORIOUS GREEN DYE INK REFILL BOTTLE RETIRED US $4.28
|
 Ranger Heat It Dye Inks Organic Gems Coral Turquoise Jade US $10.49
|
 Ranger Heat It Dye Inks Brilliant Gems Sapphiregarnet Citrine US $10.49
|
 Clearsnap Colorbox Premium Dye Ink Refill by Stephanie Bernard Tangerine US $4.49
|
 Clearsnap Colorbox Premium Dye Ink Refill by Stephanie Bernard Strawberry US $4.49
|
 Clearsnap Colorbox Premium Dye Ink Refill by Stephanie Bernard Spearmint US $4.49
|
 Clearsnap Colorbox Premium Dye Ink Refill by Stephanie Bernard Sky US $4.49
|
 Clearsnap Colorbox Premium Dye Ink Refill by Stephanie Bernard Licorice US $4.49
|
 Clearsnap Colorbox Premium Dye Ink Refill by Stephanie Bernard Guava US $4.49
|
 Clearsnap Colorbox Premium Dye Ink Refill by Stephanie Bernard Grape US $4.49
|
 Clearsnap Colorbox Premium Dye Ink Refill by Stephanie Bernard Chocolate US $4.49
|
 UNINKED Rollagraph Standard Cartridge works w stampin up stamp wheel ink US $4.74
|
 ALCOHOL INK Tim Holtz LIGHTS Ranger Adirondack permanent acid free YOU PICK US $3.14
|
SEI Tumble dye Rubber Band Method Tutorial
Adding Shingles To Your Dollhouse by Stephanie Watson
Aside from paint, nothing will add more to your dollhouseâs exterior appearance than a good shingle job. As you prepare to put your dollhouse together, it is important to think about what kind of roofing will look best, whether or not you want to dye your shingles, and how to attach them to your dollhouse.
Types of Roofing
Most dollhouse kits already come with all the shingles you need. Unless otherwise specified, they are usually rectangular. If you are looking for a different shape, octagonal shingles can provide a unique look to your dollhouse. Some distributors also carry other shapes, such as square, fishscale, or diamond, and a few even have non-wood roofing materials available: tin or aluminum roofing, adobe or Spanish tiles, and asphalt and slate tiles. However, using the shingles provided in your kit is the most economical option, and the results are usually just as beautiful as any other type of roofing. Note: the instructions for dying and attaching shingles below apply specifically to wooden shingles.
Dyeing Shingles
If you do decide to use wooden shingles, you will want to consider purchasing shingle dye. It is inexpensive, and makes a big difference as far as appearance goes. There are two colors available: red-brown and gray. The red-brown dye is rich in color and adds a lot of warmth to your dollhouse exterior. The gray dye is more discreet, and draws less attention to the dollhouse roof.
Shingle dye comes with instructions, but we will also describe the process here. First, be aware that the dying process requires 2-3 days, so be sure to complete it before you want to add the shingles to your dollhouse. Materials you will need include:
âA large piece of cardboard (for 1000 shingles, you will want at least a 2âx3â piece), or several smaller pieces
âTwo plastic gallon milk containers
âA set of rubber gloves (the dye kit comes with one, but you may want to have another one so that you can work with two hands)
When you are ready to dye, place the cardboard in a well-lit working area and have your shingles handy. Cut off the tops of the milk containers so that you will be able to fit your fist inside. Also, you will be pouring the dye from one container to the other, so you might want to make a notch in each milk container. Following the directions on the dye kit, add the dye and water to one of the milk containers. Then, add a handful of shingles to the milk container. After about a minute, pour the dye into the empty container. Then, wearing gloves, place each shingle on the cardboard so that it can dry out. Repeat the process until all the shingles have been dyed; this will usually take 1-2 hours. The drying process will take about 48 hours to complete.
One thing to keep in mind as you are dying: the longer the shingles are immersed in the dye, the richer and darker the color will be. So, if youâd prefer to just tint your shingles, make sure to pour the dye out after about 30 seconds, and spread out the shingles as quickly as possible. If you want the color to be deeper, you can leave the shingles in the dye for an extra minute or so.
Adhering Shingles To Your Dollhouse
Before you attach the shingles, you will want to draw shingle guidelines on all roof surfaces. This will ensure that your shingle rows will be straight. All dollhouse kits will come with specific measurements for the guidelines.
When you are ready to attach the shingles, keep in mind a few principles: shingle from the bottom up, and start every other row with a half shingle so that a good overlapping pattern forms. Rather than putting glue on each shingle, lay down a thin line of glue across the entire row, and attach the shingles one at a time. This prevents clumps of glue from oozing between the cracks, and helps keep your rows straight. Most dollhouses have interesting rooflines--depending on your dollhouse, you may have to work around windows, balconies, chimneys, dormers, corners, or other unique features. Have an X-acto knife ready, and once your shingle row abuts one of these features, cut the next shingle to fit the space available. Often, the entire top row will need to be cut to the right size.
We have found that the best material for attaching shingles is Liquid Nails, a type of glue. It can be found in most stores with other heavy-duty glues. One thing to keep in mind is that you will only need a thin line of glue, so be sure that the hole you poke in the opening of the glue tube is quite small.
Aside from paint, nothing will add more to your dollhouseâs exterior appearance than a good shingle job. As you prepare to put your dollhouse together, it is important to think about what kind of roofing will look best, whether or not you want to dye your shingles, and how to attach them to your dollhouse.
Types of Roofing
Most dollhouse kits already come with all the shingles you need. Unless otherwise specified, they are usually rectangular. If you are looking for a different shape, octagonal shingles can provide a unique look to your dollhouse. Some distributors also carry other shapes, such as square, fishscale, or diamond, and a few even have non-wood roofing materials available: tin or aluminum roofing, adobe or Spanish tiles, and asphalt and slate tiles. However, using the shingles provided in your kit is the most economical option, and the results are usually just as beautiful as any other type of roofing. Note: the instructions for dying and attaching shingles below apply specifically to wooden shingles.
Dyeing Shingles
If you do decide to use wooden shingles, you will want to consider purchasing shingle dye. It is inexpensive, and makes a big difference as far as appearance goes. There are two colors available: red-brown and gray. The red-brown dye is rich in color and adds a lot of warmth to your dollhouse exterior. The gray dye is more discreet, and draws less attention to the dollhouse roof.
Shingle dye comes with instructions, but we will also describe the process here. First, be aware that the dying process requires 2-3 days, so be sure to complete it before you want to add the shingles to your dollhouse. Materials you will need include:
âA large piece of cardboard (for 1000 shingles, you will want at least a 2âx3â piece), or several smaller pieces
âTwo plastic gallon milk containers
âA set of rubber gloves (the dye kit comes with one, but you may want to have another one so that you can work with two hands)
When you are ready to dye, place the cardboard in a well-lit working area and have your shingles handy. Cut off the tops of the milk containers so that you will be able to fit your fist inside. Also, you will be pouring the dye from one container to the other, so you might want to make a notch in each milk container. Following the directions on the dye kit, add the dye and water to one of the milk containers. Then, add a handful of shingles to the milk container. After about a minute, pour the dye into the empty container. Then, wearing gloves, place each shingle on the cardboard so that it can dry out. Repeat the process until all the shingles have been dyed; this will usually take 1-2 hours. The drying process will take about 48 hours to complete.
One thing to keep in mind as you are dying: the longer the shingles are immersed in the dye, the richer and darker the color will be. So, if youâd prefer to just tint your shingles, make sure to pour the dye out after about 30 seconds, and spread out the shingles as quickly as possible. If you want the color to be deeper, you can leave the shingles in the dye for an extra minute or so.
Adhering Shingles To Your Dollhouse
Before you attach the shingles, you will want to draw shingle guidelines on all roof surfaces. This will ensure that your shingle rows will be straight. All dollhouse kits will come with specific measurements for the guidelines.
When you are ready to attach the shingles, keep in mind a few principles: shingle from the bottom up, and start every other row with a half shingle so that a good overlapping pattern forms. Rather than putting glue on each shingle, lay down a thin line of glue across the entire row, and attach the shingles one at a time. This prevents clumps of glue from oozing between the cracks, and helps keep your rows straight. Most dollhouses have interesting rooflines--depending on your dollhouse, you may have to work around windows, balconies, chimneys, dormers, corners, or other unique features. Have an X-acto knife ready, and once your shingle row abuts one of these features, cut the next shingle to fit the space available. Often, the entire top row will need to be cut to the right size.
We have found that the best material for attaching shingles is Liquid Nails, a type of glue. It can be found in most stores with other heavy-duty glues. One thing to keep in mind is that you will only need a thin line of glue, so be sure that the hole you poke in the opening of the glue tube is quite small.
Aside from paint, nothing will add more to your dollhouseâs exterior appearance than a good shingle job. As you prepare to put your dollhouse together, it is important to think about what kind of roofing will look best, whether or not you want to dye your shingles, and how to attach them to your dollhouse.
Types of Roofing
Most dollhouse kits already come with all the shingles you need. Unless otherwise specified, they are usually rectangular. If you are looking for a different shape, octagonal shingles can provide a unique look to your dollhouse. Some distributors also carry other shapes, such as square, fishscale, or diamond, and a few even have non-wood roofing materials available: tin or aluminum roofing, adobe or Spanish tiles, and asphalt and slate tiles. However, using the shingles provided in your kit is the most economical option, and the results are usually just as beautiful as any other type of roofing. Note: the instructions for dying and attaching shingles below apply specifically to wooden shingles.
Dyeing Shingles
If you do decide to use wooden shingles, you will want to consider purchasing shingle dye. It is inexpensive, and makes a big difference as far as appearance goes. There are two colors available: red-brown and gray. The red-brown dye is rich in color and adds a lot of warmth to your dollhouse exterior. The gray dye is more discreet, and draws less attention to the dollhouse roof.
Shingle dye comes with instructions, but we will also describe the process here. First, be aware that the dying process requires 2-3 days, so be sure to complete it before you want to add the shingles to your dollhouse. Materials you will need include:
âA large piece of cardboard (for 1000 shingles, you will want at least a 2âx3â piece), or several smaller pieces
âTwo plastic gallon milk containers
âA set of rubber gloves (the dye kit comes with one, but you may want to have another one so that you can work with two hands)
When you are ready to dye, place the cardboard in a well-lit working area and have your shingles handy. Cut off the tops of the milk containers so that you will be able to fit your fist inside. Also, you will be pouring the dye from one container to the other, so you might want to make a notch in each milk container. Following the directions on the dye kit, add the dye and water to one of the milk containers. Then, add a handful of shingles to the milk container. After about a minute, pour the dye into the empty container. Then, wearing gloves, place each shingle on the cardboard so that it can dry out. Repeat the process until all the shingles have been dyed; this will usually take 1-2 hours. The drying process will take about 48 hours to complete.
One thing to keep in mind as you are dying: the longer the shingles are immersed in the dye, the richer and darker the color will be. So, if youâd prefer to just tint your shingles, make sure to pour the dye out after about 30 seconds, and spread out the shingles as quickly as possible. If you want the color to be deeper, you can leave the shingles in the dye for an extra minute or so.
Adhering Shingles To Your Dollhouse
Before you attach the shingles, you will want to draw shingle guidelines on all roof surfaces. This will ensure that your shingle rows will be straight. All dollhouse kits will come with specific measurements for the guidelines.
When you are ready to attach the shingles, keep in mind a few principles: shingle from the bottom up, and start every other row with a half shingle so that a good overlapping pattern forms. Rather than putting glue on each shingle, lay down a thin line of glue across the entire row, and attach the shingles one at a time. This prevents clumps of glue from oozing between the cracks, and helps keep your rows straight. Most dollhouses have interesting rooflines--depending on your dollhouse, you may have to work around windows, balconies, chimneys, dormers, corners, or other unique features. Have an X-acto knife ready, and once your shingle row abuts one of these features, cut the next shingle to fit the space available. Often, the entire top row will need to be cut to the right size.
We have found that the best material for attaching shingles is Liquid Nails, a type of glue. It can be found in most stores with other heavy-duty glues. One thing to keep in mind is that you will only need a thin line of glue, so be sure that the hole you poke in the opening of the glue tube is quite small.
Aside from paint, nothing will add more to your dollhouseâs exterior appearance than a good shingle job. As you prepare to put your dollhouse together, it is important to think about what kind of roofing will look best, whether or not you want to dye your shingles, and how to attach them to your dollhouse.
Types of Roofing
Most dollhouse kits already come with all the shingles you need. Unless otherwise specified, they are usually rectangular. If you are looking for a different shape, octagonal shingles can provide a unique look to your dollhouse. Some distributors also carry other shapes, such as square, fishscale, or diamond, and a few even have non-wood roofing materials available: tin or aluminum roofing, adobe or Spanish tiles, and asphalt and slate tiles. However, using the shingles provided in your kit is the most economical option, and the results are usually just as beautiful as any other type of roofing. Note: the instructions for dying and attaching shingles below apply specifically to wooden shingles.
Dyeing Shingles
If you do decide to use wooden shingles, you will want to consider purchasing shingle dye. It is inexpensive, and makes a big difference as far as appearance goes. There are two colors available: red-brown and gray. The red-brown dye is rich in color and adds a lot of warmth to your dollhouse exterior. The gray dye is more discreet, and draws less attention to the dollhouse roof.
Shingle dye comes with instructions, but we will also describe the process here. First, be aware that the dying process requires 2-3 days, so be sure to complete it before you want to add the shingles to your dollhouse. Materials you will need include:
âA large piece of cardboard (for 1000 shingles, you will want at least a 2âx3â piece), or several smaller pieces
âTwo plastic gallon milk containers
âA set of rubber gloves (the dye kit comes with one, but you may want to have another one so that you can work with two hands)
When you are ready to dye, place the cardboard in a well-lit working area and have your shingles handy. Cut off the tops of the milk containers so that you will be able to fit your fist inside. Also, you will be pouring the dye from one container to the other, so you might want to make a notch in each milk container. Following the directions on the dye kit, add the dye and water to one of the milk containers. Then, add a handful of shingles to the milk container. After about a minute, pour the dye into the empty container. Then, wearing gloves, place each shingle on the cardboard so that it can dry out. Repeat the process until all the shingles have been dyed; this will usually take 1-2 hours. The drying process will take about 48 hours to complete.
One thing to keep in mind as you are dying: the longer the shingles are immersed in the dye, the richer and darker the color will be. So, if youâd prefer to just tint your shingles, make sure to pour the dye out after about 30 seconds, and spread out the shingles as quickly as possible. If you want the color to be deeper, you can leave the shingles in the dye for an extra minute or so.
Adhering Shingles To Your Dollhouse
Before you attach the shingles, you will want to draw shingle guidelines on all roof surfaces. This will ensure that your shingle rows will be straight. All dollhouse kits will come with specific measurements for the guidelines.
When you are ready to attach the shingles, keep in mind a few principles: shingle from the bottom up, and start every other row with a half shingle so that a good overlapping pattern forms. Rather than putting glue on each shingle, lay down a thin line of glue across the entire row, and attach the shingles one at a time. This prevents clumps of glue from oozing between the cracks, and helps keep your rows straight. Most dollhouses have interesting rooflines--depending on your dollhouse, you may have to work around windows, balconies, chimneys, dormers, corners, or other unique features. Have an X-acto knife ready, and once your shingle row abuts one of these features, cut the next shingle to fit the space available. Often, the entire top row will need to be cut to the right size.
We have found that the best material for attaching shingles is Liquid Nails, a type of glue. It can be found in most stores with other heavy-duty glues. One thing to keep in mind is that you will only need a thin line of glue, so be sure that the hole you poke in the opening of the glue tube is quite small.
Dollhouse City has built many dollhouses over years and loves sharing knowledge and tips in building a dollhouse. Dollhousecity.com offers doll house kits, accessories, and helpful hints in setting up your dollhouse kits.
Article Source: http://www.earticlesonline.com/Article/Adding-Shingles-To-Your-Dollhouse/350458
